Endress+Hauser | PMP55 Z1 transmitter
PMP55-AA21JA1KGKAGJS1A+Z1: configuration and sourcing record
This page records PMP55-AA21JA1KGKAGJS1A+Z1 as the Cerabar PMP55 diaphragm-seal pressure transmitter. First, teams use this configuration for process pressure or liquid level measurement. However, an adjacent suffix may change the sensor, process connection, electronics, communication or approval arrangement. Therefore, keep the complete order code visible in every purchase request.
Core specification snapshot
| Product family | Cerabar PMP55 diaphragm-seal pressure transmitter |
|---|---|
| Measurement or device principle | Cerabar PMP55 diaphragm-seal pressure transmitter |
| Electrical / signal point | Confirm electrical interface from the complete order code |
| Application condition | Confirm application medium, process limits and installation position |
| Dimensions / process connection | Configuration-specific; verify nominal size, connection and drawing against the complete order code. |
| Ex / approval status | Do not infer an approval from the family name. Confirm the exact approval option and certificate for PMP55-AA21JA1KGKAGJS1A+Z1. |
The table separates family facts from option-dependent values. In addition, use the official reference and the installed nameplate to confirm electrical, dimensional and approval details.
Process role
The complete option code defines the electrical, mechanical, communication and approval details. Compare the installed label with the official reference before purchase. In practice, the published family gives engineers the starting point. Next, compare the full code, nameplate and installation record before releasing a replacement.
Technical checkpoints
Before quotation, compare the following points for PMP55-AA21JA1KGKAGJS1A+Z1. Then record the result in the purchasing file:
- Pressure range
- Diaphragm seal
- Process connection
- Membrane material
- Fill fluid
- Output
For a reliable technical record, attach a nameplate image, the existing wiring or process connection drawing, and the installed transmitter or control-system reference. As a result, engineering can separate a family match from an exact replacement.
Receiving inspection
First, record the operating medium, temperature and pressure conditions where relevant. Next, confirm isolation, grounding, seals, orientation, cable condition and commissioning responsibility before removal or installation. After start-up, save the measured value, alarm behavior, communication status and calibration or zeroing result. Finally, keep that evidence with the maintenance work order so the next technician can compare the replacement with the same operating conditions.
Spare planning
HKXY Instruments can check the complete E+H code, current availability, price, lead time, export packing and supporting documents. Meanwhile, use the official Endress+Hauser product reference to compare the technical boundary. Finally, send the installed label and quantity for a precise quotation.
Related E+H reference matrix
Related model numbers for comparison only. Confirm the complete order code before ordering.
| Related model |
|---|
| FMD71-AA24AAA2H2HGKDCDCCZJCZJA |
| 8F3B15-AAIBAEDFAASAAASAA2 |
| CLS15E-AAHC10A |
| CLS50-A1A3 |
