Endress+Hauser | Levelflex FMP51 BUAB3 2500 mm
FMP51-BBACCBUAB3RGJ: configuration and sourcing record
This page records FMP51-BBACCBUAB3RGJ as the Levelflex FMP51 guided-wave radar transmitter (2500 mm probe length; confirm probe type and process connection). First, teams use this configuration for configured process-vessel level duty. However, an adjacent suffix may change the sensor, process connection, electronics, communication or approval arrangement. Therefore, keep the complete order code visible in every purchase request.
Core specification snapshot
| Product family | Levelflex FMP51 guided-wave radar transmitter (2500 mm probe length; confirm probe type and process connection) |
|---|---|
| Measurement or device principle | Levelflex FMP51 guided-wave radar transmitter (2500 mm probe length; confirm probe type and process connection) |
| Electrical / signal point | Confirm electrical interface from the complete order code |
| Application condition | Confirm application medium, process limits and installation position |
| Dimensions / process connection | Configuration-specific; verify nominal size, connection and drawing against the complete order code. |
| Ex / approval status | Do not infer an approval from the family name. Confirm the exact approval option and certificate for FMP51-BBACCBUAB3RGJ. |
The table separates family facts from option-dependent values. In addition, use the official reference and the installed nameplate to confirm electrical, dimensional and approval details.
Application fit
The complete option code defines the electrical, mechanical, communication and approval details. Compare the installed label with the official reference before purchase. In practice, the published family gives engineers the starting point. Next, compare the full code, nameplate and installation record before releasing a replacement.
Configuration points
Before quotation, compare the following points for FMP51-BBACCBUAB3RGJ. Then record the result in the purchasing file:
- Probe
- Mounting geometry
- Process temperature
- Pressure
- Interface conditions
- Communication
For a reliable technical record, attach a nameplate image, the existing wiring or process connection drawing, and the installed transmitter or control-system reference. As a result, engineering can separate a family match from an exact replacement.
Installation record
First, record the operating medium, temperature and pressure conditions where relevant. Next, confirm isolation, grounding, seals, orientation, cable condition and commissioning responsibility before removal or installation. After start-up, save the measured value, alarm behavior, communication status and calibration or zeroing result. Finally, keep that evidence with the maintenance work order so the next technician can compare the replacement with the same operating conditions.
Order release
HKXY Instruments can check the complete E+H code, current availability, price, lead time, export packing and supporting documents. Meanwhile, use the official Endress+Hauser product reference to compare the technical boundary. Finally, send the installed label and quantity for a precise quotation.
Related E+H reference matrix
Related model numbers for comparison only. Confirm the complete order code before ordering.
| Related model |
|---|
| CLS15E-AAHC10A |
| CLS50-A1A3 |
| COS41-2S |
| CPS11-2AA4ESA |
