Our wide range of products includes Field Communicator, Pressure transmitters, Temperature transmitters, Flow Meters, DCS etc.
EnglishالعربيةDeutsch한국어پارسیภาษาไทยTürkçeاردوTiếng Việt

Mobrey Ultrasonic Liquid Level Detection Systems for Interface Applications 433SD 805M1 / M10 with high quality


  • Delivery time: in stock

    Payment Terms: Paypal, Aliexpress, Western Union, T/T

    MOQ: 1pcs

    Specifications


    Mobrey Ultrasonic Liquid Level Detection Systems for Interface Applications 433SD 805M1 / M10 with high quality

    Mobrey Ultrasonic Liquid Level Detection Systems

    Overview

    Ultrasonic liquid point level switches (gap type sensors) are used in non-hazardous area industrial processes to detect high or low liquid levels or liquid interface.

    Mobrey ultrasonic point level switches are activated when there is a liquid present between the sensor’s transmitter and receiver crystals. In this way, the absence of liquid results in a low level being indicated.

    The level switches are fitted with dual-coaxial cable for connection to a control unit. This cable can be extended with suitable coaxial extensions up to 164 ft. (50 m).

    Typical applications include interface detection duty for immiscible liquids and sludge blanket level.

     

     

    Mobrey MCU200 Series Industrial Control Units

     

    The MCU201 and MCU203 control units provide simple and economical control electronics for wall-mounting near a tank or pipeline containing a single ultrasonic level switch.

     

    MCU200 Series features:

    • Wall-mounting IP65 polycarbonate enclosure
    • 115/230 Vac (MCU201) or 24 Vdc (MCU203)
    • Suitable for use with all Mobrey ultrasonic liquid point level switches
    • DPDT relay output for wet-to-dry or dry-to-wet changeover indication, external control, or alarm condition indication
    • Accepts a voltage-free contact input e.g. to actuate a pump control function via the output DPDT relay
    • Three LED indicators – Normal, Alarm, and Fault
    • Selectable time delay
    • Continuous cable check (between sensor and MCU200)

     

    Information for 433SD

    • Level switches may be mounted in any orientation to signal liquid presence or at a 10 degree angle to detect the interface
    • Ultrasonic sensor operation can be adversely affected by high aeration or foam in the liquid. If you have an application query, contact Customer Support for advice on the selection of a suitable liquid level detection system
    • Supplied with 33 ft. (10 m) of cable as standard. Contact Rosemount Measurement for other cable lengths up to 164 ft. (50 m)
    • If the MCU control unit is required, add MCU201 (115/230 Vac) or MCU203 (24 Vdc) at the time of ordering the 402SD, 433SD or 442SD

     

    Information for 402SD and 442SD

    • Level switches may be mounted in any orientation to signal liquid presence
    • Ultrasonic sensor operations can be adversely affected by high aeration, solids, or foam in the liquid. If you have an application query, contact Customer Support for advice on the selection of a suitable liquid level detection system
    • Supplied with 10 ft. (3 m) of cable as standard. Contact Rosemount Measurement for other cable lengths up to 164 ft. (50 m)
    • If the MCU control unit is required, add MCU201 (115/230 Vac) or MCU203 (24 Vdc) at the time of ordering the 402SD, 433SD or 442SD

     

    Information for MCU200 Series Control Units

    • Wall-mounting IP65 polycarbonate enclosure
    • If the MCU control unit is required, add MCU201 (115/230 Vac) or MCU203 (24 Vdc) at the time of ordering the 402SD, 433SD or 442SD
    • The 402SD, 433SD, and 442SD sensors and MCU200 Series control units are for use in non-hazardous areas only

     

    Similar model codes for your reference :

    433SD 801M1 / M10

    433SD 805M1 / M10

    433SD 802M1 / M10

    433SD 803M1 / M10

    433SD 803M3 / M10

    402SD 80 / M03

    442SD 80 / M03

    MCU201

    MCU203

     

    We are specialized in intelligent instruments, including : control system, transmitters, flow meters,sensors, recorders, analyzers, control valves, controllers, PLC’s, etc.

    We mainly supply Yokogawa, Emerson, Rosemount, Honeywell, Siemens, ABB, FLUKE, Endress+Hauser, SchneiderElectric, Moeller, FUJI,Omron, Pepperl+Fuchs, Hima, Yaskawa, Norgren, CHINT, Hach, Weidmuller, Phoenix, MTL, SMC, Testo, Rockwell,etc.

     

    Why choose us?

    1.100% original product, 100% quality assurance.
    If you find a fake. Please contact us without hesitation! We afford the shipment cost! We send you a new product asking zero cent!

    2.Varied payment methods.
    We adopt T/T, western union and paypal. If you can not trust us , you can choose to pay it via Aliexpress! 100% make your money safe!

    3.SHIPPING:
    We can shipping all over the world.via DHL,UPS,Fedex,TNT and EMS etc., the packaging is very safe and strong. if you have any special needs,please notify me.
    It will take 3 to 7days to reach in your hands.

     

    Packaging:

    Imported with original packaging or standard export packing.Customize design is acceptable.

     

    Contact

    Wuhan Xieyuan Automation Equipment Co., Ltd
    Telephone:86-027-85583233
    Mobile Phone:86-18671080257
    Fax:86-027-85309780
    Contact:victor@whxyauto.com
    Skype:victordu963@gmail.com
    Whatsapp&Viber are available
    Address:7-A16,Caishen Commercial Plaza,Hankou Railway Station

     

    Have any question, Please enter the form below and click the submit button.


    *
    *
    4 + 5 = ?
    Please enter the answer to the sum & Click Submit to verify your registration.
    CATEGORY AND TAGS:

    Mobrey

    Related Items

  • Product Categories

  • Why Us?

    1. 100% original product, 100% quality assurance.

    2. Varied payment methods.

    3.Safe & High-efficient shipping

  • Contact Us




    Contact :Victor Du

    Mobile Phone:86-18671080257
    Mail:victor@hkxytech.com

    Address:7-A16,Caishen Commercial Plaza, Hankou Railway Station, Wuhan, China