Endress+Hauser | Promass F 300 8F3B15
8F3B15-AAIBAEDFAASAAASAA2: configuration and sourcing record
This page records 8F3B15-AAIBAEDFAASAAASAA2 as the Proline Promass F 300 Coriolis flowmeter. First, teams use this configuration for high-accuracy process mass flow measurement. However, an adjacent suffix may change the sensor, process connection, electronics, communication or approval arrangement. Therefore, keep the complete order code visible in every purchase request.
Core specification snapshot
| Product family | Proline Promass F 300 Coriolis flowmeter |
|---|---|
| Measurement or device principle | Coriolis mass-flow measurement; density and temperature options depend on configuration |
| Electrical / signal point | Transmitter I/O and communication are order-code dependent |
| Application condition | Process fluid and pressure drop must match the selected sensor size |
| Dimensions / process connection | Configuration-specific; verify nominal size, connection and drawing against the complete order code. |
| Ex / approval status | Do not infer an approval from the family name. Confirm the exact approval option and certificate for 8F3B15-AAIBAEDFAASAAASAA2. |
The table separates family facts from option-dependent values. In addition, use the official reference and the installed nameplate to confirm electrical, dimensional and approval details.
Identity
Engineers select Coriolis measurement for direct mass-flow measurement, with density and temperature information available on suitable configurations; tube size, process connection, pressure and output remain code-specific. In practice, the published family gives engineers the starting point. Next, compare the full code, nameplate and installation record before releasing a replacement.
Specification snapshot
Before quotation, compare the following points for 8F3B15-AAIBAEDFAASAAASAA2. Then record the result in the purchasing file:
- Flow range
- Density
- Temperature
- Pressure
- Process connection
- I/o
For a reliable technical record, attach a nameplate image, the existing wiring or process connection drawing, and the installed transmitter or control-system reference. As a result, engineering can separate a family match from an exact replacement.
Purchase record
First, record the operating medium, temperature and pressure conditions where relevant. Next, confirm isolation, grounding, seals, orientation, cable condition and commissioning responsibility before removal or installation. After start-up, save the measured value, alarm behavior, communication status and calibration or zeroing result. Finally, keep that evidence with the maintenance work order so the next technician can compare the replacement with the same operating conditions.
Acceptance notes
HKXY Instruments can check the complete E+H code, current availability, price, lead time, export packing and supporting documents. Meanwhile, use the official Endress+Hauser product reference to compare the technical boundary. Finally, send the installed label and quantity for a precise quotation.
Related E+H references
Use this matrix for comparison only. Similar family names do not establish interchangeability.
| Related code | Relationship | Compare before ordering | Replacement status |
|---|---|---|---|
| 5WBB1H-AADAEBKA0AUA120AA1 | Related E+H reference | Compare suffix, signal path, connection and approval. | Not an automatic substitute |
| 5WBB2H-AADAEBKA0AUA120AA1 | Related E+H reference | Compare suffix, signal path, connection and approval. | Not an automatic substitute |
| 5WBB80-AADAEBKA0AUA120AA1 | Related E+H reference | Compare suffix, signal path, connection and approval. | Not an automatic substitute |
| 5WBB80-AADAEBKA0AUA121AA1 | Related E+H reference | Compare suffix, signal path, connection and approval. | Not an automatic substitute |
