OZD G12 1300 repeater: technical purchase guide
OZD PROFI 12M G12-1300 is the full Hirschmann designation for long-haul PROFIBUS fiber link. This newly prepared OZD G12 1300 repeater article connects model verification with installation planning, commissioning evidence, availability, and quotation support.
Keep every character, space, and suffix from the nameplate. Similar family names can hide meaningful changes in port media, environment, approvals, software, or product generation.
Availability And Lifecycle Check
Official Belden and Hirschmann pages provide the technical reference, yet availability can differ by exact code and product lifecycle. Ask for a fresh stock and lead-time check before reserving an outage or promising a delivery date.
Send HKXY Instruments the quantity, destination, required date, old label, and application. We can review compatibility, price, export packing, and practical delivery options. Also compare the result with the official Hirschmann product information.
Single-Channel PROFIBUS Link
A one-channel optical repeater is commonly used at an endpoint or transition between copper PROFIBUS and fiber. The product belongs to the Hirschmann OZD Profi 12M EEC family. It is a two-channel long-haul optical PROFIBUS repeater for extended environments. The G12-1300 EEC type combines two long-haul optical channels with an extended environmental design for suitable network topologies.
Record baud rate, bus termination, optical partner, and channel mode. Then compare LED behavior before and after commissioning. Keep the resulting drawings and measurements with the equipment record for future service.
Related Hirschmann Models
These models can support a broader spare or migration discussion. They are not automatic substitutes. Compare their interfaces, speed, fiber type, power, software, environmental rating, protocol role, and lifecycle before selection.
- OZD PROFI 12M G12-1300 PRO
- OZD PROFI 12M G11
- RPS 260/PoE EEC
- RED25-04002Z6TT-SDDY9HPE2SXX.X.XX
- MTS2848-6X-S / 942999843
Bus And Optical Evidence
Review EEC requirement, two 1310 nm routes, partner types, route losses, BFOC connectors, operating modes, supply, alarm contact, mounting, and approvals. An incompatible optical partner may fail even when the fiber connectors fit correctly. Therefore, use the complete OZD PROFI 12M G12-1300 designation throughout technical and commercial correspondence.
- Electrical segment
- One optical channel
- Partner type
- DIP settings
OZD G12 1300 repeater Repeater Acceptance
Commission in a controlled sequence. First, inspect mounting, connectors, and power. Next, verify device recognition and saved settings. Then test each active path and the required fault response. Finally, record alarms, link states, measurements, and configuration files after the site accepts operation.
